![BEAVIS Motorsport](/img/default-banner.jpg)
- Видео 342
- Просмотров 7 511 331
BEAVIS Motorsport
Австралия
Добавлен 8 авг 2006
Find out more at www.beavismotorsport.com/links/
My current MX-5's:
Mazda MX-5 NB VVT Turbo
Mazda MX-5 NA Clubman VVT swap
All content of this channel is also available and approved for viewing via the MiataTube android app.
My current MX-5's:
Mazda MX-5 NB VVT Turbo
Mazda MX-5 NA Clubman VVT swap
All content of this channel is also available and approved for viewing via the MiataTube android app.
Rusted Seat Mounts & Slider Rail Repairs - Porsche 944
This old run-down 944 has some terribly rusty seat rails, and the mounting bolts are pretty toast.
I need to get the seats out to replace the carpets, but that's going to be difficult with the way these rails are right now... lets see how I go.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
►My 2nd Channel:
www.youtube.com/@TechBeaver
► SUPPORT ME
JOIN the channel: ruclips.net/user/bbeavisjoin
SHOUT me a Tip: streamlabs.com/bbeavis/tip
SUPPORT me on Patron: www.patreon.com/BEAVISmotorsport
► MORE INFO
Subscribe: bit.ly/Sub2BEAVIS
Join Discord Server: discord.gg/PagsNvjeqk
BEAVIS MS: www.beavismotorsport.com/links/
My Sim Rig: bit.ly/BeavisSimRacing
Facebook: beavismx5
Instagram: BEAVISmotorspor...
I need to get the seats out to replace the carpets, but that's going to be difficult with the way these rails are right now... lets see how I go.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
►My 2nd Channel:
www.youtube.com/@TechBeaver
► SUPPORT ME
JOIN the channel: ruclips.net/user/bbeavisjoin
SHOUT me a Tip: streamlabs.com/bbeavis/tip
SUPPORT me on Patron: www.patreon.com/BEAVISmotorsport
► MORE INFO
Subscribe: bit.ly/Sub2BEAVIS
Join Discord Server: discord.gg/PagsNvjeqk
BEAVIS MS: www.beavismotorsport.com/links/
My Sim Rig: bit.ly/BeavisSimRacing
Facebook: beavismx5
Instagram: BEAVISmotorspor...
Просмотров: 327
Видео
GUIDE: Replacing Diff Side Axle Seal - Mazda MX-5 Miata
Просмотров 498Месяц назад
Replacing a differential Side Axle seal in my Mazda MX-5 Miata with the NB torsen 7" diff. Because it was leaking oil and made a bit of a mess after a recent track day. Seal install tool: www.printables.com/model/837530-mazda-mx5-miata-diff-axle-side-seal-tool Mazda part used: MA02-27-238A ►My 2nd Channel: www.youtube.com/@TechBeaver ► SUPPORT ME JOIN the channel: ruclips.net/user/bbeavisjoin S...
Mazda MX-5 NA8 at Winton Raceway 1:44 // 24-Mar-2024 // Nugget Nationals
Просмотров 768Месяц назад
My best lap time (PB) during the recent Nugget Nationals event. This is a 'mostly' standard NA MX-5 with NB drive-line swap. It runs all stock NB parts, including the OEM ecu, exhaust intake, wiring, dash etc. Car specs: NB VVT 1.8 engine NB 6 speed gearbox NB brakes NB Torsen LSD 15x9 Wheels with Hankook RS3 Hawk Blue Brake pads Voston Coilovers ►My 2nd Channel: www.youtube.com/@TechBeaver ► S...
Why I wish I'd bought a Car Lift sooner
Просмотров 9 тыс.2 месяца назад
Buying Home Car Lift Hoist for my small home garage has been a long time coming! Tired of breaking my back, laying on the floor, and fussing around with jack stands. I purchased this full price, with my own money. I have no obligation to make this video, TuffLift were not aware of this video and I received no money. So, yes, this is 100% my own slightly-biased opinion. This is the unit I purcha...
Taking my Dad for Laps in Turbo MX-5 Miata at Sandown Raceway
Просмотров 1,2 тыс.2 месяца назад
Taking my Dad for Laps in Turbo MX-5 Miata at Sandown Raceway
Fixing the Engine in my Porsche 944 that hasn't run in 15 years (Ep3)
Просмотров 1,7 тыс.3 месяца назад
Fixing the Engine in my Porsche 944 that hasn't run in 15 years (Ep3)
PASSENGER RIDE MADE HER SICK - Riding shotgun in Time Attack MX-5 Miata
Просмотров 1,5 тыс.4 месяца назад
PASSENGER RIDE MADE HER SICK - Riding shotgun in Time Attack MX-5 Miata
Making a Formula/GT3 Carbon Fibre Steering Wheel - DIY GUIDE
Просмотров 1,5 тыс.5 месяцев назад
Making a Formula/GT3 Carbon Fibre Steering Wheel - DIY GUIDE
Will a $100 part be the answer to this DEAD Porsche 944's issues? (Ep2)
Просмотров 1,1 тыс.5 месяцев назад
Will a $100 part be the answer to this DEAD Porsche 944's issues? (Ep2)
One Man and his MX-5's / Best Bits of BEAVIS 2023 Recap
Просмотров 6166 месяцев назад
One Man and his MX-5's / Best Bits of BEAVIS 2023 Recap
SAVING AN ABANDONED Porsche 944 from the SCRAPYARD (Ep1)
Просмотров 1,1 тыс.6 месяцев назад
SAVING AN ABANDONED Porsche 944 from the SCRAPYARD (Ep1)
I bought a NEW Car, created a NEW Channel, and more NEWS + Giveaway!
Просмотров 1,9 тыс.6 месяцев назад
I bought a NEW Car, created a NEW Channel, and more NEWS Giveaway!
Boosted MX-5 Miata versus 911 Turbo & EVO @ Winton Raceway // AusTimeAttack 2023
Просмотров 1,4 тыс.7 месяцев назад
Boosted MX-5 Miata versus 911 Turbo & EVO @ Winton Raceway // AusTimeAttack 2023
$400 vs $2000 Coilovers - Are CHEAP coilovers worth it?
Просмотров 3,8 тыс.7 месяцев назад
$400 vs $2000 Coilovers - Are CHEAP coilovers worth it?
How to Drive Sandown Raceway // Turn by Turn Guide
Просмотров 2,4 тыс.8 месяцев назад
How to Drive Sandown Raceway // Turn by Turn Guide
How to Race Like a PRO for Less: CHEAP Direct Drive Sim Racing Wheel! CAMMUS DDWB
Просмотров 4,8 тыс.8 месяцев назад
How to Race Like a PRO for Less: CHEAP Direct Drive Sim Racing Wheel! CAMMUS DDWB
5 Things You MUST Do Before A Trackday
Просмотров 1,1 тыс.8 месяцев назад
5 Things You MUST Do Before A Trackday
Spins & Epic Overtakes - 300HP TURBO MX-5 Miata @ The Bend International
Просмотров 3,1 тыс.9 месяцев назад
Spins & Epic Overtakes - 300HP TURBO MX-5 Miata @ The Bend International
See this Driver's Eye View of Sandown Raceway - 300HP MX-5 Challenge
Просмотров 9319 месяцев назад
See this Driver's Eye View of Sandown Raceway - 300HP MX-5 Challenge
Is this the best track in Australia? Boosted MX-5 Miata at The Bend Int. Circuit Live Commentary
Просмотров 1,8 тыс.10 месяцев назад
Is this the best track in Australia? Boosted MX-5 Miata at The Bend Int. Circuit Live Commentary
Diagnosing Check Engine Light on a Mazda MX5 Miata
Просмотров 3,9 тыс.10 месяцев назад
Diagnosing Check Engine Light on a Mazda MX5 Miata
This car is Amazing to Drive - TimeAttack MX-5 Miata 300HP - Live In-Car @ Sandown Raceway!
Просмотров 3,2 тыс.10 месяцев назад
This car is Amazing to Drive - TimeAttack MX-5 Miata 300HP - Live In-Car @ Sandown Raceway!
How can a MX-5 Miata be faster than EVO, WRX, SKYLINE? // AusTimeAttack 2023
Просмотров 4,4 тыс.11 месяцев назад
How can a MX-5 Miata be faster than EVO, WRX, SKYLINE? // AusTimeAttack 2023
300HP Miata on the LIMIT - Live In-Car Commentary from The Bend Motorsport Park!
Просмотров 2,4 тыс.11 месяцев назад
300HP Miata on the LIMIT - Live In-Car Commentary from The Bend Motorsport Park!
5 Biggest Issues When You TURBO Your Car
Просмотров 1,6 тыс.Год назад
5 Biggest Issues When You TURBO Your Car
This 300HP Miata Track Car Is Pushing the Limits! Sandown Raceway
Просмотров 3,1 тыс.Год назад
This 300HP Miata Track Car Is Pushing the Limits! Sandown Raceway
Brake Failure Saga Is Not Over + Gearbox Dead
Просмотров 1,7 тыс.Год назад
Brake Failure Saga Is Not Over Gearbox Dead
AusTimeAttack 2023 - Open Class RWD Winner 1:29.2 - Winton Raceway
Просмотров 1,8 тыс.Год назад
AusTimeAttack 2023 - Open Class RWD Winner 1:29.2 - Winton Raceway
I'm Taking My Boosted Mazda MX-5 to AusTimeAttack 2023
Просмотров 1,4 тыс.Год назад
I'm Taking My Boosted Mazda MX-5 to AusTimeAttack 2023
The absurd amount of ads on your website is just plain stupid. beyond greedy.
going to have to dig out my printer and give this ago just hop it still works. if not would you make one for me and ill buy it :D
If I wanted to use this just for sensors like boost oil pressure etc would this still be a good option using pressure sensors and this?
I just went and ordered a vvt oil pump gear. Not the complete pump. Hopefully install will be easy enough.
Yeah, i think this is a good (cheaper) approach rather than a full pump.
Great video. I've called some mechanics and they had no clue. My torsen type 2 started to whine. So I've got to swap it out for a welded and the shafts seem too short. I do have another open to throw in for now or get welded. Even while I get the LSD looked at. Any reason for this? Guessing the welded diff is from an early mk1? But I'm sure it had the rubber guide. Ideally I don't want to swap the half shafts.
Still watch this regularly to try improve my times :)
Glad to know it might be helping some people, thanks!
What's the part number for the seal?
MA02-27-238A
may i ask where you ordered all the ali extentions from please?
Bolts/washers are from a local bolt shop. www.cncshop.com.au/ supply the extrusion T-nuts and brackets are from ebay.
They don’t make em for my car so I’ll make it myself!!!
That's the spirit :-)
So you don’t need to do any type of brake line bleeding? And is this the same as a vy commodore?
Changing fluid on a regular schedule is always a good idea, but not strictly necessary to do so when changing pads. I've not owned a VY so I cannot say - but the process would be very similar.
How many miles do you suggest I should replace my fuel filter ?
I believe Mazda service intervals suggest ~40,000 kilometers/25,000 miles.
hey there, i changed my time zone in the dietpi txt file to canada/eastern as per the link to wiki says, i am in toronto. though it wont update the settings and keeps me in 2019, wrong date and time. i cant access internet because of this and cant seem to find a solution, i can connect to internet okay, any ideas?
Some ideas: Manually correct your time on the Pi via gui or console. Manually run the time sync process.
@@Bbeavisokay I will try and see if I can figure it out, thank you!
this is so helpful, thank you so much!
You're so welcome!
Can you clone the sd card and send it my way . ... ive been having trouble doing it :/
I am sure you will find the solution.
Thanks mate, very helpful video. I'm a complete newb to the sport
Glad to help
Great stuff mate! Inspired me to build a digital dashboard for my motorhome, currently converting from a coach bus.
Go for it!
LS Swap… boring but very effective.
Would be cool. I don't have budget for such endeavors, so please send all your spare pennies to Australia so I can build the long term funds!
@@Bbeavis no spare pennies but I’ve been in a swapped one on track, very docile.
Any chance we could get the non screwing into the bodywork version ? Like epoxy or something
Alt strat: Use duct tape.
A whole lot of challenges with this car. Cheers
It feels like 'normal' old car problems.
K24 swap!
I welcome you to supply the funding such a project.
Seems like your shop has some new junior mechanics. Really growing the business!
They are more of a cost than a profit.
Hahaha. Teach that baby how to hold the flashlight!
I employ the methodology of letting them experiment and learn the correct solution themselves through failure.
Come posso trovare questo programma per realizzare le mie auto ?!
Ciao, scusa, il mio italiano non è buono. Innanzitutto la maggior parte degli strumenti di sviluppo sono inclusi in AssettoCorsa, nella cartella \assettocorsa\sdk. In secondo luogo, la progettazione 3D viene eseguita in Blender, un software gratuito che puoi scaricare. Buona fortuna.
@@Bbeavis grazie mille ciaoooo 👋🙏💪
Do you have or know of a "bare bones basic" version, I'm talking about a simple as possible version that only displays lap times? Just as minimal as possible, something like a GPS lap timer but with a giant display I could mount in my car?
For just lap timer, there are other specific solutions. Even mobile phone apps. And they would work better in this case.
Great vid. I love how construction is different in different parts of the world. Your “garage” has no rear wall! Being from Canada, have never seen something like this. I do like it.
Thanks 👍
This is brilliant
Thank you.
I'm glad something on my channel actually helped someone! That's so funny to me but cool. Just some things that will help: -Put some rubber sheets under the base if you're not bolting it down, it will stop it moving when you drive on (and off). -The motor is 10A, so you can rewire it to use a conventional socket. -If you recess it into the floor, cleaning a fluid spill is a nightmare so install drainage. -If you reverse on you drive off forward so you won't get skid marks on the floor. Doesn't bother me, but just an FYI.
Thanks for your prompting, I've used this thing so much already in just the first 6mths of ownership - it's wild I didn't do it sooner.
AWESOME video. LOTS of info. I am currently looking into DIY my own rig. What was total cost of the rog itself??!??
Around $800-1000 for the frame.
Netscape, really?! 😂
:-D
You forgot the biggest power adder. Racing stripes
I keep that one as a secret for myself.
It'll be worth checking the diff oil level since it will be lowered due to the leak. Also, a bit of lube on the sealing surface helps the seal from being burnt from friction. Cheers for making up the seal installer tool design! I printed one of your designs to do my rear main seal. 👍
Good tip!
Underrated PC nostalgia FTW.
That 90's school library PC experience.
🍺
Thanks angry
Great work, no flies on you. 🦟
Thanks 👍
Why not use fiberglass?
This stuff was easily available and just needed some trimming to bolt it to the car. Fibreglass would require a lot of work to make a panel, skills/time/space that I did not have at the time.
Don’t you need to start the engine again after an oil change to get the new oil circulated through the filter and *then* check the dipstick?
With the exception of some unique edge case, such as a car that hasn't run for many months, the difference would be negligible.
@Bbeavis I have this setup all working now. Thank you for publishing. Question, is there a way to connect a laptop to the megasquirt while the pi is connect via USB? Similar to TSdash?
You can run TSDash on the Pi instead of the full TunerStudio software.
My old Clio cup with the first owner.
Really? Cool, hope you drive better than they do :-P
is this car also available on AC?
Yes, I made a model of it for Assetto Corsa.
@@Bbeavis where do i get itttt
@@clarencepenas8406 beavismotorsport.com/sim-racing/
miata of theseus
:-P
5 minutes and the wife’s steam iron and the creases are gone
:-D
I know this is an old video but I have a 2001 5 speed 1.8 VVT with the torsen type 2 I believe. Can I drop in an open diff from another 1.8 NB without swapping axles or driveshaft
Yes you can.
@@Bbeavis what about a fuji diff?
@@SizzaE60 Yes, they are the same externally, with just a different internal diff centre.
@@Bbeavis ok thanks so much wasn’t expecting u to respond 6 years later 😭
I need to do this job, thanks for this video! :)
Cool, good luck :-)
Can you use it with your stock ecu ?
Unfortunately no, this specific software I've used won't work on the stock ECU.
Hellish complexity
It's just a raspberry pi. Not that complex.
Do they make for short nose na6 models??
I don't think so.
Big thanks! Just did this successfully. One quick tip is right click the etcher app on the desktop and run etcher as administrator first. I had to do it that way or it etcher would give an error trying to upload the OS from file. I’m on windows 10 btw
Glad it was useful! And good tip. :-)
This was a great video. That lift system looks like a perfect fit for your workshop!
Thanks, it's honestly been really useful.
Unrelated question, but what alignment specs do you run on your track nb?
I mostly just follow 949 racing's advice around what is described for the race alignment here: www.949racing.com/supermiata/tech-info/miata-race-alignment-info/
"More Power!" Tim the Tool Man
:-)